Create beautiful valentine cards with bwp's Valentine
Card Kits. Using materials from the kits, here are some ideas
to get you started!
 |
| |
materials |
| |
blossom
4bar envelope
5x3.5” cocoa cardstock
blossom heart-shaped cardstock
10” pink cotton ribbon
“happy heart day!” message label
ebonys pattern gift wrap |
|
"happy heart day" valentine
envelope liner
- To create the envelope liner, take your envelope and place down
onto the handmade paper. Trace with a pencil around the envelope.
- Trim the liner out with scissors or an x-acto knife and a ruler.
Then trim a 1/2” piece from the bottom of the liner.
- Tuck the liner inside the envelope and fold the flaps of the
envelope and liner down.
- Pull the envelope flap away from the liner and roll mono-adhesive
along the back of the liner.
- Press the liner and envelope firmly to adhere.
card
- Measure 4.75x3.5” on remaining gift wrap sheet. Trace
with a pencil and trim with scallop scissors.
- Adhere this piece, centered, to the cocoa cardstock with mono-adhesive.
- Tilt the blossom heart-shaped cardstock on its side and make
sure no edges extend beyond the edge of the cocoa card. Adhere
with mono-adhesive.
- Take the piece of ribbon and wrap it around the card, adhering
both ends of the ribbon at the front with double-sided tape.
- Cut out the “happy heart day!” greeting from the
message sheet and adhere directly over the ribbon with mono adhesive.
 "love"
valentine
- To create the envelope liner, follow directions from the “Happy
Heart Day” Valentine above, tracing the picnic blossom gift
wrap for the liner and adhering inside the blossom envelope.
- Cut edges of the red cardstock with scallop scissors to create
a ruffled edge.
- Adhere the red cardstock to the manila tag with mono-adhesive.
- Measure 4x3.5” from the remaining gift wrap sheet, trace
with a pencil and trim with scallop scissors.
- Adhere gift wrap, centered on the red cardstock, with mono-adhesive.
- Adhere the blossom coin envelope with mono-adhesive, centered
on the gift wrap.
- Place a special treat (gift card, money, love note) inside
the coin envelope!
- Cut out the “love” greeting from the message sheet
with scallop scissors.
- Secure envelope closed and adhere the corner of the “love”
label with a red dot sticker.
- Tie the 8” ribbon through the hole of the manila tag and
secure with a knot.
"be mine" valentine
- To create the envelope liner, follow directions from the “Happy
Heart Day” Valentine above, tracing the cocoa blossom gift
wrap for the liner and adhering inside the ecru square envelope.
- To create the heart shape, fold the 4” x 4” piece
of bright pink cardstock in half.
- Cut out a half heart shape with your scissors. Unfold.
- Wrap the baker’s twine around the heart shape as many
times as your piece will allow. Secure directly at the center
of the card with double sided tape.
- Cut out the “be mine” greeting from the message
sheet with scallop scissors and adhere directly over the ribbon
and double-sided tape.
- Adhere the heart with mono-adhesive centered on the chartreuse
circle card.
 back
to design tips
|
